Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Camera installation
This camera is a colour discrete camera in a smoke detection housing. It has been
developed for indoor applications in video surveillance systems.
You will find the technical specifications at the end of this manual.
Camera installation
Fix the camera onto a solid basis which is capable to carry the weight of the camera.
Ensure that the camera is safely installed by using only suitable screws.
Power supply and monitor impedance
Only use a stabilised power supply unit with sufficient wattage (see "Technical specifications"
for recommended power supply). Only approved cables should be used.
If a monitor is connected directly, the monitor impedance has to be set to 75 Ohm. Verify the
position of the switch in case the video picture is of poor quality.
The BNC jack is for the video output (1 Vpp at 75 Ohm).
Improper handling of the appliance will invalidate the warranty.
Screw holes
to mount the camera
_________________________________________________________________________________
Bedienungsanleitung / User manual VTC-2612D
Built-in 3.7 mm
lens
- 14 -
Camera module
with lens
Power supply
connector
Video
connector
Werbung
Inhaltsverzeichnis
