Keep Warm Function; Control Panel Pause; Energy Consumption Display; Basic Settings - NEFF T1.D41 Gebrauchsanleitung

Keep warm function

The Keep warm function is suitable for melting chocolate or
butter and for warming food and ovenware.
Switching on the Keep warm function
Select the hotplate.
1.
Touch the L symbol.
2.

Control panel pause

If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a control panel
pause function. Touch the
The indicator light above the

Energy consumption display

You can use this function to have the total energy consumption
between switching the hob on and off displayed.
Once switched off, the energy consumption in kilowatt hours
(e.g. 1.08 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other things, on
the voltage quality of the power supply.

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your needs.
Display Function
Automatic childproof lock
™‚
Switched off.*
‹
‚ Switched on.
Audible signal
™ƒ
‹ Confirmation signal and operation error signal are switched off.
Only the operation error signal is switched on.
‚
ƒ Only the confirmation signal is switched on.
Confirmation signal and operation error signal switched on.*
„
* Basic setting
32
" symbol. An audible signal sounds.
" symbol lights up. The control
– appears in the heat setting display. The Keep warm function
is switched on.
Switching off the Keep warm function
Select the hotplate and touch the L symbol.
heat setting display.
The hotplate switches off after 10 seconds and the residual
heat indicator appears.
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
Note: The main switch is excluded from the control panel
pause function. You can switch off the hob at any time.
The display has not been activated. You can find out how to
activate the display in the Basic settings section.
‹ appears in the