Master/Slave-Operation; Cleaning And Maintenance - Eurolite Led Floodlight 63 W Rgb Bedienungsanleitung

Master/Slave-Operation

The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the rear panel of the device you can find an XLR-jack and an XLR-plug, which can be used for
connecting several devices.
Choose the device which is to control the effects. This device then works as master-device and controls all
other slave-devices, which are to be connected to the master-device via a balanced microphone lead.
Connect the OUT-jack with the IN-plug of the next device.
Note:
After switching on, the slave device will automatically detect whether master data is received or not. If the
data is received, the control LED flashes rapidely. If there is no data received at the DMX-input, the control
LED does not flash.

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
18/19 00033444.DOC, Version 1.1