Troubleshooting; Specifications - Monacor HDVR-184 Bedienungsanleitung

8.5 Troubleshooting

1. Q: What can I do if the system does not detect the HDD?
A: Check if the power supply system is properly connected
and data cord and power cables are securely connected.
2. Q: We have changed the password but do not remember
the new password, how can we access the system?
A: If you forget system password, please consult with the
service personnel.
3. Q: We are not getting any video signal on the DVR, what
is wrong?
A: Check camera video cable and connections; or check
monitor video cable and connections; or confirm that
the camera has the power and /or check camera lens
setting.
4. Q: Why some channels display just a blank screen even if
they receive video sources?
A: Check if the camera is connected to the system prop-
erly displays the image; check if the camera is properly
supplied with power.
5. Q: Can the DVR have problems if it gets too hot, how can
I prevent this?
A: The DVR has a fan to help it dissipate heat while it is
running. Please place the DVR in a place where there

9 Specifications

Model
Camera video inputs
Video outputs for monitors
Resolution
Video compression
Recording
Recording modes
Camera name
Protection
Video loss detection
Alarm inputs
Alarm outputs
Signal device
Interfaces
Hard disks
Power supply
Admiss. ambient temperature
Dimensions (W × H × D)
Weight
Subject to technical modification.
HDVR-184
4 × HD-SI (BNC)
1 × HDMI for main monitor
©
1 × VGA for call monitor
1920 × 1080 pixels (Full HD)
H.264
max. 25 images /sec. per camera
manuell, timer, event
OSD
password protection
yes
4
1
integrated
RS-485
USB 2.0
LAN (RJ 45)
HDMI
eSATA
optional, max. 2 × 4 TB (SATA)
12 V ⎓ /5 A 12 V ⎓ via PSU provided
0 – 40 °C
380 × 50 × 340 mm
0.95 kg
is good air circulation and away from heat sources to
increase stability and life of the DVR.
6. Q: Why the Remote Controller can't work normally?
A: Check if the battery is power off; or check if the Remote
Controller is broken.
7. Q: Can we records whilst playing-back?
A: Yeah, you can do it. The system support you records
whilst playing-back.
8. Q: Can we erase some recorded file from DVR.
A: Considering the safety factor, you can't delete the re-
corded file directly from the device. When you actually
erase all the recorded files, please select HDD format
function
9. Q: Why does the Buzzer keep sounding?
A: Please check if motion detection is on and the system
has detected motion, make sure the HDD is being de-
tected and has sufficient space available; check if video
has lost etc.
10. Q: Why can't stop [Stop] function?
A: Pressing [Stop] button only can stop manual record. If
you want to stop Scheduled record, please revise to [No
Record] during this period.
HDVR-188
8 × HD-SI (BNC)
1 × HDMI for main monitor
©
1 × VGA for main monitor
1920 × 1080 pixels (Full HD)
H.264
max. 25 images /sec. per camera
manuell, timer, event
OSD
password protection
yes
8
1
integrated
RS-485
USB 2.0
LAN (RJ 45)
HDMI
eSATA
optional, max. 2 × 4 TB (SATA)
12 V ⎓ /5 A 12 V ⎓ via PSU provided
0 – 40 °C
380 × 50 × 340 mm
1.5 kg
All rights reserved by MONACOR
No part of this instruction manual may be reproduced in any form or
by any means for any commercial use.
HDVR-186
16 × HD-SI (BNC)
1 × HDMI for main monitor
©
1 × VGA for main monitor
1920 × 1080 pixels (Full HD)
H.264
max. 12.5 images /sec. per camera
manuell, timer, event
OSD
password protection
yes
8
1
integrated
RS-485
USB 2.0
LAN (RJ 45)
HDMI
eSATA
optional, max. 2 × 4 TB (SATA)
12 V ⎓ /5 A 12 V ⎓ via PSU provided
0 – 40 °C
380 × 50 × 340 mm
2.6 kg
INTERNATIONAL GmbH & Co. KG.
®
53