1. Motion Detection
Allow you configure its <Sensitivity>, <Alarm out>, <Alarm re-
cord> and <Alarm Capture> etc. Details setting should be con-
sistent with DVR local setting (chapter 6.2.5.1 on page 42).
2. I /O Alarm
Allow you configure <I /O Status>, <Alarm output>, <I/O Alarm
record> and <Alarm email> etc. Details setting should be con-
sistent with DVR local setting (chapter 6.2.5.2 on page 42).
7.3.3.5 Device
Click <Device> to unfold its sub-options: HDD and PTZ.
1. HDD
Allow you check out HDD status and overwritten time shown
as fig. 7-30. Detail setting should be consistent with DVR local
setting (chapter 6.2.6.1 on page 43).
2. PTZ
Configuration (shown as fig. 7-31): Details setting should
be consistent with DVR local setting (chapter 6.2.6.2 on
page 43).
50
7.3.3.6 System
Click <System> option to unfold its sub-options: General,
Users and information.
1. General
User could check DVR's language and video system, and also
set system time, date format, DST and NTP shown as fig. 7-32.
Details setting should be consistent with DVR local setting.
(chapter 6.2.7.1 on page 43)
Fig. 7-28
2. Users
Allow you configure user name and password shown as
fig. 7-33. Details setting should be consistent with DVR local
setting (chapter 6.2.7.2 on page 43).
Fig. 7-29
3. Information
Allow you check out device name, number, type, MAC address,
software version, IE version and hardware version shown as
fig. 7-34.
Fig. 7-30
7.3.3.7 Advanced
Click <Advance> to unfold its sub-options: Firmware update,
Load default, Events and system maintain etc.
1. Firmware update
Allow you upgrade DVR system remotely shown asfig. 7-35.
Fig. 7-31
Fig. 7-32
Fig. 7-33
Fig. 7-34
Fig. 7-35