Local Setting; Logout; Appendix; Record Alarm Setting - Monacor HDVR-184 Bedienungsanleitung

Please follow below steps to upgrade the system:
a) Select the upgrade file's path shown as fig. 7-36. Please
note that the format of upgrade file is *.sw.
b) Click <Start update>, now processing bar will display current
upgrade status shown as fig. 7-37.
2. Load Default
Allow you recover defaulted parameters of DVR remotely
shown as fig. 7-38. Details setting should be consistent with
DVR local setting.
3. Events
Allow you configure abnormal type, buzzer output time, and
alarm email and show message shown as fig. 7-39. Details
setting should be consistent with DVR local setting.
4. Maintain
Allow you set auto system maintain for DVR remotely shown
as fig. 7-40. Detail setting should be consistent with DVR

local setting.

7.3.4 Local setting
Under <Local setting> option, user could set record path of
record file (Live record and Playback clip file), download path
of remote file, Snapshot path, File type (H.264 and AVI) and
Internal shown as fig. 7-41.
Fig. 7-36

7.3.5 Logout

Click the
Fig. 7-37

8 Appendix

8.1 Record Alarm setting

Under the record mode,
screen, and alarm will be issued. You have configured record
type to <Normal> on the <Scheduled> mode, once one alarm
occurred, the record will be saved as Normal record, on the
contrary, configured to <Alarm>, once one alarm occurred,
the record saved as Alarm record.
Under the Scheduled mode, no-record interval allow you
actiate manual record and the record file can be saved as
Fig. 7-38
Normal record.

8.2 Usage Maintenance

1. Please close the [OFF] button on the rear panel firstly to
avoid any data missing.
2. Please make sure DVR keep away from heating source.
3. Clean the internal dust regularly, keep DVR aeration well
and be easy to heat dissipate.
4. Please not plug in RS-485 when power is on to avoid any
damage to the port.
Fig. 7-39
5. Please check the HDD cable and data cable to avoid the
cable aging.
6. Please avoid other electronics device interfere video/audio
signal of DVR a.s.a.p., or static electricity and induced
voltage damage to DVR.
icon to return back the log-in interface.
icon or icon will appear on the
Fig. 7-40
Fig. 7-41
51