Network; Network Set - Monacor HDVR-184 Bedienungsanleitung

For other button functions please refer to previous chapter
"6.2.3.5 File Backup".

6.2.4 Network

6.2.4.1 Network set

Click [Main menu  Network  Network] to enter into the
below interface shown as fig. 6-28.
After selecting network mode – such as DHCP, PPPOE or
static allocation – and setting up web ports, you can visit
DVR remotely through a network or internet.
UPnP (Universal Plug and Play) function: If router supports
UPnP function and set <UPnP> to "Enable", system will auto-
matically forward port to router.
DNS: DNS server is generally provided by local ISP. Herein please
enter the IP address of your DNS.
Type DHCP
When selecting DHCP from the Type, A router will automat-
ically allocate IP address for your DVR. After restarting each
time, the IP address captured by your DVR may be different.
So, port forwarding is required when you visit a remote DVR.
1) Select DHCP and click [Apply] button.
2) Exit and restart DVR.
3) Input media port and HTTP port.
4) Set IP address captured by DVR and HTTP port to a router.
5) Visit a remote DVR
http: // public net IP: HTTP port (such as: 19010)
http: // intranet IP: HTTP port (such as: 19010 – only use
for Intranet)
6) Input the IP address of your domain name server.
Friendly Reminder:
1. All the parameters you set are available only when you click [Apply]
and after system are restarted.
2. User need to change MAC address when there are multiple DVRs
at the same local area network. Details please refer to chapter
"6.2.7.3 Information".
40
Fig. 6-27
Fig. 6-28
Fig. 6-29
Type Static
When selecting Static from the Type, user can directly input
IP address, Subnet Mask, Gateway and DNS shown as below
fig. 6-30.
1) Set your net type to Static.
2) Set Client port number (such as 19009), and the port need
to be forwarded to a router.
3) Input HTTP port number (such as 19010), and the port
need to be forwarded to a router
4) Input a specified IP address to [IP address] column.
5) The Subnet Mask, gateway and DNS server should be con-
sistent with your router's configurations.
6) Input DNS address. Please check router firstly. The setting
should be consistent with routers.
7) Click [Apply] button.
Now you could remotely visit the DVR via IP
http: // public net IP: HTTP port (such as: 19010)
http: // intranet IP: HTTP port (such as: 19010 – only use
for Intranet)
Type PPPoE
When selecting PPPoE from the Type, user can input user
name and password provided by ISP and set Media and HTTP
port. And now you can visit your remote DVR by using the IP
address captured after registering a domain name and HTTP
port and connect to your DVR via public network.
Type 3G
When selecting 3G from the Type. Details please follow below
steps:
1) Input Mobile Port (China Telecom: #777; Others: *99#).
2) Click <Apply>. System will automatically capture IP.
3) Enter IP address:web port to visit DVR remotely.
Under the above four net mode, you can visit your remote DVR
via DDNS and apply for free DDNS account from the websites:
www.3322.org or www.dyndns.org.
Fig. 6-30
Fig. 6-31
Fig. 6-32