Privacy Zone; Record Set; Record Parameters; Schedule - Monacor HDVR-184 Bedienungsanleitung

6.2.1.3 Privacy Zone

The function allow you setup privacy zone parameters
according to fig. 6-6. Each channel could set up to four pri-
vacy zones (fig. 6-7), and please follow below steps to set:
1) Select the area no (1 – 4).
2) Click [Setup] to adjust position of mask area.
3) After finishing position adjust, click right key of mouse to
return back [Privacy zone] interface.
4) Click [Apply] to save the above setting.

6.2.2 Record set

6.2.2.1 Record parameters

Click [Main menu  Record  Record Para] to enter into the
interface shown as fig. 6-8.
Channel: Allow you setup the channel you desired.
Record: Allows you set up record status (Enable /Dis-
able) of each channel
Pre-record: Motion detection and I/O triggered record
support Pre-record function.

6.2.2.2 Schedule

1) Click [Main Menu  Record  Schedule] to enter into the
interface shown as fig. 6-9.
2) [Channel] option allows you select one channel you desired.
3) To setup weekly schedules, tick-select the box of the record
status you want (Normal, Motion, Alarm or No Record) and
Fig. 6-6
Fig. 6-7
Fig. 6-8
Fig. 6-9
then click on each box in the schedule time line that you
want this method to apply to. You can use the [Copy – To]
pull-down menus and Copy button to copy settings from
one day to another day or all days.
4) After you complete the schedule you activate it by clicking
the [Apply] button.
5) You can also click on the Default button to use the system
defaults.
Meaning of the colors: Under the <record> menu and <search>
menu, original color stands for no record, "Red" stands for alarm
record, "yellow" stands for Motion record and "Green" stands for
normal record.

6.2.2.3 Main Stream

Go to [Main menu  Record  Main Stream] to enter into
the interface shown as fig. 6-10.
Resolution: Supports 720P, 960H (WD) and D1 (D).
Switching between WD and D1 is made
automatically.
Frame rate: PAL: 1 – 25 f/s; NTSC: 1 – 30 f/s.
Bit rate: User could select the relative value by pull-
down menu.
Audio: When tick-selecting the option, system will
record video stream with audio simultaneously.

6.2.3 Search

6.2.3.1 Record Search

Click [Main Menu  Search  Record Search] to enter into
the interface shown as fig. 6-11.
Channel: Allows you select the channel(s) you desire
to search.
Date Search:
In the Video Search screen, user can search for
all the records in a specific date. To execute
a video search, highlight and select the date
numeric field; and then click a detailed time
quantum of the specific date, system will start
the playback from the first record of the time
quantum.
Time Search: In the <Search screen>, user can search for
a specific date and time for a recording and
view it in Playback mode. This is useful for
hunting a specific recording of an incident if
you know the date and time it occurred.
Fig. 6-10
Fig. 6-11
37