Technical Specifications - EuroLite SL-1200 LD Follow Spot Bedienungsanleitung

Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Sound-control:
Flash-rate:
Number of colours:
Colour-wheel 1:
Colour-wheel 2:
Dimensions (LxWxH):
Weight:
Fitting lamp:
OMNILUX OMI 1200 100V/1200W
OSRAM HMI1200/GS 100V/1200W
PHILIPS MSI 1200W 100V/1200W
Recommended controllers:
EUROLITE DMX Operator
Wizard-512 DMX-Software + Interface
Wizard-1024 DMX-Software + Interface
Fitting lighting stand:
Wind up SHORT winch tripod
Wind up MIDI winch tripod
Maximum ambient temperature t
Maximum housing temperature t
Fuse:
Please note: Every information is subject to change without prior notice. 19.01.2005 ©
230 V AC, 50 Hz ~
1840 W
4
3-pin XLR
via built-in microphone
1-7 Hz
7 dichroic + white
2 correction filters + white
24 possible colour combinations
1700 x 440 x 410 mm
46 kg
No.:
89302005
89302010
89302015
No.:
70064520
51860101
51860110
No.:
60000785
60000795
: 45° C
a
(steady state): 95° C
B
F 10 A, 250 V
27/51 51787360_V_1_2.DOC