Danger To Life - Futurelight Eye-19 Rgbw Zoom Bedienungsanleitung

The fixture's base enables to be mounted in two ways.
manual can only give in part. The operator must therefore inform himself on the current safety instructions
and consider them.
The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions!
Install the safety bond by inserting the quick link in the safety eyelet on the bottom of the base. Pull the
safety bond over the trussing system etc. Insert the end in the quick link and tighten the fixation screw.
The maximum drop distance must never exceed 20 cm.
A safety bond which already hold the strain of a crash or which is defective must not be used again.
Before taking into operation for the first time, the installation has to be approved by an expert!
The Moving-Head can be placed directly on
the stage floor or rigged in any orientation on
a truss
characteristics (see the drawing).
For overhead use (mounting height >100
cm), always install an appropriate safety
bond.
You must only use safety bonds complying
with DIN 56927, quick links complying with
DIN 56927, shackles complying with DIN EN
1677-1 and BGV C1 carbines. The safety
bonds,
carbines must be sufficiently dimensioned
and used correctly in accordance with the
latest industrial safety regulations (e. g. BGV
C1, BGI 810-3).
Please note: for overhead rigging in public
or industrial areas, a series of safety
instructions have to be followed that this

DANGER TO LIFE!

37/56
without altering its
quick links, shackles
00088949.DOC, Version 1.1
operation
and the