Trouble Shooting - WOLFF TANGO Original Bedienungsanleitung

Cylindrical brush disc, #525811
For preparing new anhydrite- and magnesia-screeds. For abrading of anhydrite- screed, for abrading areas
contaminated with paint, mortar, felt-, foam- and adhesive residues.
Corrugated steel-brush disc, #525881
For brushing and preparation of subfloors. For removing the loose sintered material on new anhydrite- and
magnesia screed.
Flat steel brush disc #525871
For removal of foam, felt and hessian backing residues. For abrading anhydrite and self-levelling screeds, for
industrial cleaning. Brush length 45 mm. The open brushes work well with tacky residues. The brushes do not
clog.
Cleaning pad discs 400mm, 10mm
For initial cleaning, #525950,
For maintenance, #525960,
For polishing, #525970,
Super pad discs 400mm, 20mm
For initial cleaning, #525981,
For maintenance, #525982,
For polishing, #525983,
Shampoo brush #525570
With soft brushes for cleaning textile floorings
Perlon brush #525580
With hard brushes for initial cleaning of linoleum, PVC, stone, ceramics, etc.
Polishing brush, cocofibre #525560
For cleaning and polishing of linoleum, PVC, stone, ceramics, etc.
Scrubbing brush #525590
For maintenance of linoleum, PVC, stone, ceramics, etc. For coarse soiling and encrustation.

7.0 Trouble shooting

Trouble
Machine does not
start
Assembly of handle wrong
described in Item 5.0
Switch-on lever (4)
cannot be actuated
02/2010 Einscheibenschleifmaschine TANGO, #056366
For cleaning and mounting of gauze
For coarse cleaning and removing soil
For polishing, cleaning and wax coating
For cleaning strong soiling
For coarse cleaning and removing soil
For polishing, cleaning and wax coating
Eventual cause
Power supply
Disconnected
blown fuse
defective cable or plug
Assemble handle like
Safety lever (4) can only be
actuated, if handle not vertical
FRÄSMASTER
Elimination
Have machine
repaired by a qualified
electrician,
resp. change parts
Lower the handle of
the machine
15