Controls; Mode; Subwoofer Phase - Adam Sub24 Bedienungsanleitung

5. Controls

Controls for the satellite filter, phase switch, signal on/continous mode and
Sub Level/Filter are located on the side panel of the subwoofer. The follow-
ing tips are intended to assist you at using the controls in the best manner.
5.1

Mode

This push button allows you to choose between
• Signal On: woofer starts operation as soon as a musical signal arrives,
and stops after 15 minutes without a signal.
• Continuous: the unit is permanently working.
We recommend the "Signal on" position. It minimises power
consumption and makes handling very easy.
5.2

Subwoofer Phase

With the Phase Switch you can alter the phase of the subwoofer
relative to the satellites. That means to change the polarity of the bass
unit. Depending on the distance between woofer and satellites, either
0° or 180° may be the better position. We recommend to try out what
position sounds better within your system.
Sub24 Manual / english
9