Technical Specifications - Omnitronic Combo 70 Bedienungsanleitung

If clacking sounds are heard from the speaker-system, screws may have loosened due to the continuous
vibrations. The speaker-system should be checked by a specialist. Especially for public use, the speaker-
system should be checked before every operation so that the speaker-system and the speakers in the
systems are always well fixed.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

8. TECHNICAL SPECIFICATIONS

General:
Power supply:
Power consumption (max.):
Dimensions:
Weight:
Control unit:
Inputs:
4 mono
1 stereo
1 Aux-Return
Outputs:
2 Speaker Out
1 Aux-Send
Speaker-system:
Rated power:
Program power:
Components:
Sensitivity (1 W/m):
Impedance:
Frequency range:
Dimensions:
Weight:
Amplifier:
Nominal power output:
Maximum power output:
Distortion:
S/N-ratio:
Frequency range:
Please note: Every information is subject to change without prior notice. 03.03.2006 ©
230 V AC, 50 Hz ~
150 W
480 x 240 x 140 mm
7 kg
XLR or balanced ¼" jacks
RCA
balanced ¼" jack
Speakon
balanced ¼" jack
100 W RMS
150 W
10" woofer, 1" horn
95 dB
8 Ohms
50 Hz - 18 kHz
450 x 335 x 240 mm
9.5 kg (piece)
75 W RMS / 4 Ohms
150 W / 4 Ohms
0.05 %
>90 dB
20 Hz - 20 kHz
29/29 11038895_V_1_0.DOC