X 12 Channel Preset; Switch The Dimmer Display; Memorize Scenes; Call Up Scenes - EuroLite Scene Setter Bedienungsanleitung

The red LED above the Record-button is lit again and the program mode is unlocked.

2 x 12 channel Preset

With the Scene Setter you can adust two different scenes in Preset A and Preset B and fade from one to
another via the master-faders.
Press the Mode Select-button, until the A Double/Preset B-LED is lit.
Push Master A-fader to maximum.
Push channel-faders in Preset A to the desired setting.
Pull the Master B-fader to maximum.
Push channel-faders in Preset B to the desired setting.
Fade from Preset B to Preset A by pushing Master A-fader.
In Double Preset-mode, the buttons over the master faders can be used as Flash-buttons.

Switch the dimmer display

The dimmer display can be switched from percent to the DMX-value:
Press and hold the Record-button.
Press the Insert-button and the display switched to the DMX-value (0-255).
In order to switch the display back to percent, repeat the procedure.

Memorize scenes

With the Scene Setter you can memorize up to 48 different scenes with 24 channels (Page 1 to Page 4).
Press the Mode Select-button, until the 1-24 Single/Preset Park-LED is lit.
Push the Master A-fader to maximum.
Push channel-faders to the desired setting.
Press the Record-button.
Press and hold the Record-button and press the desired Flash-button in Preset B.
The scene is now memorized on this fader.

Call up scenes

Press the Mode Select-button, until the Chase/Scenes-LED is lit.
Pull all channel-faders to minimum.
Push the Master A-fader and the Fade Time-fader to maximum.
Push the channel-fader of the desired scene in Preset B to maximum.
The scene will be called up.

Memorize chasers

With the Scene Setter you can memorize up to 48 different scenes with 24 channels (Page 1 to Page 4).
Press the Mode Select-button, until the 1-24 Single/Preset Park-LED is lit.
Push the Master A-fader to maximum.
Push channel-faders to the desired setting.
Press the Record-button.
Push channel-faders to the desired setting for editing the next scene and press the Record-button.
Memorize as many scenes as desired or until the maximum (999 scenes) is reached.
Press and hold the Record-button and press the desired Flash-button in Preset B.
The scene is now memorized on this fader.

Call up chasers

Press the Mode Select-button, until the Chase/Scenes-LED is lit.
Pull all channel-faders to minimum.
Push the Master A-fader and the Fade Time-fader to maximum.
Push the channel-fader of the desired chaser in Preset B to maximum.
The chaser will be called up.
23/28 00020580.DOC, Version 1.5