Connection To Satellite Dish; Connection To A Hi-Fi System; Connecting To Usb Storage - Xoro HRS 2600 Bedienungsanleitung

Connection to satellite dish

Connect the cable of your satellite dish to the Antenna input LNB IN of
the Receiver.
Notes:
•
Screw the so-called F plug together with the LNB IN.
•
Please make sure to avoid short circuit at the F plug.
•
Employ only high quality antenna cables . Low quality antenna
cables might cause disturbance
You can connect further satellite receivers onto the LNB out. We recommend it only to technically
experienced users, for the receivers connected this way affect each other and do not share the
complete program accessible to both receives.
Connection to a Hi- Fi system
A coaxial cable is necessary for the S/PDIF signals for the digital connection to a Hi-Fi system. This
cable is not included in the delivery of this receiver. Connect the S/PDIF out put with the S/PDIF
input of your Hi– Fi system. Please refer to the manual of the Hi-Fi system to select the audio input.
Notes:
The Receiver could output digital signals in PCM-(Stereo) or AC3-Bitstream (Dolby Digital). If your
Hi-Fi system provides no sound for programs with Dolby Digital sound track, please refer to page 34
to change the out put format of the S/PDIF out put.

Connecting to USB storage

The USB port is on the front side of the Receiver. It takes the receiver under circumstances some
time to recognize the USB and get ready for further operation.
Please remove the USB storage only after playback processes are completed.
Following USB devices will be supported:
•
USB storage
•
Max. capacity 1024GB
•
File system: FAT32, NTFS
Notes:
•
There are a variety of USB storages on the market. Not all of them conform the specification
of USB storage. If your USB storage could not be read by the Receiver, please try another
USB storage.
•
If a USB device could not be read any more, please carry out a data storage medium analysis
with your computer or format the storage again.
•
USB storages requiring higher electric current than 500mA (0,5A) do not conform the
specification of USB storage. These USB storages could possibly not work smoothly together
with Receiver.
•
USB Storage up to 1024GB will be supported. USB storage of larger capacity could also be
used. However the compatibility of these USB storages with the Receiver could not be
guaranteed.
•
Please always save all data on the USB before connection to the Receiver.
ENG 16
Connection