Werbung
Kit Contents
1
Packungsinhalt
Dreamer 3D Drucker
Dreamer 3D Printer
Filament Spool*2
Filament-Rolle (2x)
Screw Box
*
Schraubenbox
Quick Start Guide
1.Don't strip the yellow film of the heating board, which is high temperature resistant tape, making object stick on platform easily.
Notes
2.Don't remove the tape that wrap around the nozzle, which is made from ceramic fibre to stabilize the temperature of the nozzle,
then promote fluency and stability of filament output.
3. If print with PL A filament, please remove the top cover and open the front door to ventilate well for a better printing performance.
1. High Temperature! Platform may have been heated before, make sure it already cools down before inner operation.
Warning
2. Moving parts may cause injury of crushing and scratch, keep your hands naked during operation.
This guide only applys to Dreamer 3D printer of Flashforge 3D Technology
Kurzanleitung
Netzkabel
Quick Start Guide
Power Cable
Spool Lock*2
Spulenverriegelung (2x)
Tweezer
*
Pinzette
Teile, die mit einem
USB-Kabel
USB Cable
Turbofan Baffle
Turbolüfter-Zuleitung
Scraper
*
*
Schaber
Stichel
*
markiert sind, sind in der Werkzeugkiste zu fi nden.
Parts with
are packed in tool box.
CAUTION
注意
1.Extruder hot during operation.
使用过程中喷头会发热。
Do Not Touch
2.Heating plate hot during operation. Allow surface to cool before servicing.
请勿触摸
使用过程中加热平台会发热，待平台表面冷却后再操作。
Druckplatten-Schutztape
Build Tape
SD Card
SD-Karte
Graver
Sensor Cable
*
Sensorkabel
Leveling Card
Leveling Tool
(Justierungshilfe)
Tool Box
Werkzeugkiste
Werbung
