Herunterladen Inhalt Inhalt Diese Seite drucken

Important Safeguards - Russell Hobbs Explore Juice Extractor 22880-56 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
Check the sieve for damage every time you use the appliance. Do not use the
appliance if the rotating sieve is damaged.
Always disconnect the appliance from the mains supply socket if it is left
unattended and before assembling, disassembling or cleaning.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Don't put the motor unit in liquid.
Don't use fingers or cutlery to push food down the tube – only the pusher.
Don't open the latches till the sieve has come to a complete stop.
Don't use the appliance for any purpose other than those described in these instructions.
Don't use accessories or attachments other than those we supply.
Don't operate the appliance if it's damaged or malfunctions.
PARTS
1.
Pulp container
2.
On/off switch
3.
Drive shaft
4.
Spout
5.
Separator
BEFORE USING FOR THE FIRST TIME
Remove any packaging material and labels.
Wash the pulp container, sieve, lid, food pusher and separator and in warm, soapy water.
Rinse and dry.
Wipe the motor base with a damp cloth.
Place the appliance on a dry, firm, level surface, near a power socket.
ASSEMBLY
1.
Fit the separator onto the motor unit.
2.
Put the sieve into the separator and press it down onto the drive shaft.
3.
Fit the lid over the separator.
4.
Fit the latches on each side over the rim of the lid (Fig A)
5.
Press the latches inwards until they lock (Fig B).
6.
Fit the pulp container over the right hand edge of the lid then push the bottom inwards
(Fig C).
7.
Fit the pusher into the tube.
HOUSEHOLD USE ONLY
6.
Sieve
7.
Lid
8.
Latch
9.
Pusher
` Diswasher safe
3

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis