Troubleshooting; Disposal And Declaration Of Conformity - Klarstein 10031190 Gebrauchsanweisung

Problem
Does not work.
Continuously working and can not
stop. The LED is in red all the time.
Odor can not be removed.
The dirt in the air can not be re-
moved and it works in high noise.

Disposal and Declaration of Conformity

According to the European waste regulation 2012/19/EU this symbol on the product or
on its packaging indicates that this product may not be treated as household waste. In-
stead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Your product (remote control) contains batteries covered by the European Directive. 2006/66/EC, which can-
not be disposed of with normal household waste. Please check local rules on separate collection of batteries.
The correct disposal of batteries helps prevent potentially negative consequences on the environment and
human health.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
15

Troubleshooting

Possible Cause and Solution
Check if the plug has disconnected from the socket. Connect the power
again.
Check if the covers on the left and right are installed completely. Re-
cover the covers on the left and right carefully.
It may be because of interferences. Unplug the power and restart the
unit after 15 minutes later.
The activated carbon filter or the unit may be polluted. Clean the acti-
vated carbon filter or the unit. Or replace with a new activated carbon
filter.
The HEPA filter may be polluted. Clean the HEPA filter or replace with
a new one.
The dirt may not be absorbed to the filters. Move to another room to
work continuously under high fan speed.
The room size may be too large to the applicable area.