4. Setting the date and time of day
The firmware version number will be displayed briefly
once you have inserted/replaced the batteries and then
you will be automatically prompted to set the date and
time of day.
•
Use the setting wheel (D) to set the year (B).
Confirm with OK (C).
•
Use the setting wheel (D) to set
•
the month (B).
•
Confirm with OK (C).
Use the setting wheel (D) to set
•
the day (B).
•
Confirm
•
Use the setting wheel (D) to set
the hour (A).
Confirm with OK (C).
•
•
Use the setting wheel (D) to set
the minute (A).
Confirm with OK (C).
•
After setting time and date the dis-
play will then switch to normal view.
5. Mounting of wall thermostat
The wall thermostat must be mounted in the same room
as the devices, such as radio energy-saving controllers,
window contacts or remote controls, that
have been taught-in to it.
•
First of all, find an appropriate moun-
ting location, making sure that no
electricity or similar lines run there.
Use a pen to mark the bo re hole posi-
•
tions (a) of the wall mount on the wall.
A
B
C
D
a
a
23