Independence Freestyle One Betriebsanleitung Seite 13

The following mounting is described for a Freestyle Two, right container. The mounting for the left side and for
Freestyle One has to be done analogously.
2. Connect the rescue bridle with the harness bridle by
looping the bridles or with a quick link (strength > 2400
daN) and fix the connection to prevent slipping (for
example by a neopren sleeve).
4. Close the container using the loops by the help of 3
packing cords (a,b,c). Place the handle/container
connection in between loop b) and c).
a)
6. Close right container flap with packing cords b) and c).
Put the cables through the loops.
c)
b)
a)
c)
b)
3. Stow the bridle in the harness container and place
the deployment bag in the harness container. (Lines of
deployment bag are facing to the bottom side)
a)
5. Close left container flap with packing cords a) and b).
7. Remove all packing cords! Close pin covers and
secure handle with a 2 daN seal threat (see arrow).
c)
b)
a)
c)
3)
b)
13