Stûv 16-H Montageanleitung Seite 24

Positioning the support plate and
the stove
Position the support plate on the
base. Pre-screw - screw in the M6x16
screws with hexagonal heads without
tightening in order to be able to adjust
the parts [photo 1].
Position the stove on the support
plate [photo 2].
Attachment of the link lugs
"stove – support plate"
Using the M5x12 screws with
hexagonal heads, screw in the 2 link
lugs at the front – left and right –
[photo 3].
Untighten the 2 link lugs at the back
[photos 4 & 5]. Gently tilt the stove
forwards so that the lugs at the back
are vertical [photo 6].
Retighten the rotation axis and
attach with the 2 M5x12 screws with
hexagonal heads.
instruction - installation base Stûv 16-H - 0710
24
1
3
5
2
4
6