Siemens SITRANS LR250 Betriebsanleitung Seite 97

LCD TRANSDUCER BLOCK
A & E
LARMS
7ML19985KL31
RRORS
Block Error
Block Error (tab)
Failures
Maintenance
Information
SITRANS LR250 (FF) – BETRIEBSANLEITUNG
Sensor Lifetime Limit1
Sensor Lifetime Limit2
Device Service Limit1
Device Service Limit2
LTB Scale
Internal Temp Sensor
Internal Temp High
Internal Temperature Calibration
Velocity Calibration
Receiver Init Calibration
Receiver Calibration
Tech Module Hardware
Tech Module Ramp
Receiver Frequency Calibration
Safe Process Data Corrupt
Profile Clipped
Too Few Shots Taken
Measurement Error
No Shots Taken
Measurement Was Corrupted
DMA Error
Sensor Value too High
Sensor Value too Low
Input Failure
Output Failure
Memory Failure
Lost Static Data
Lost Non-Volatile Data
Readback Check
Device Fault State
Block Configuration
Link Configuration
Other
Maintenance Required
Maintenance Demanded
Simulation Active
Local Override
Power Up
Seite 91