Reloop RMP-2760 b Bedienungsanleitung Seite 20

H) Bar Diagram
I)
J) BPM
K) Reloop
L) Pitch
M) BPM/Pitch
N) Time
O) ID3 Tag
P) Total Remain
Q) Remain
R) Elapsed
S) Auto BPM
20
A 10-digit bar diagram -H- indicates in addition to the time -N- the time
played as a graphic.
Loop
If the track playing is in Loop mode, the Loop display is indicated.
As soon as the TAP/BPM button -14- is activated, the display -M- reads the
current BPM and shows "BPM".
If a starting point for a loop is selected while in Play mode, the display is
emptied. As soon as an end point has been selected and "Reloop" -K- is
indicated.
The Pitch display goes on as soon as the Pitch mode has been activated.
Indicates either the current BPM or Pitch rating. The standard display
indicates the Pitch rating of the respective player. When operating the
TAP/BPM button -14- the BPM value is indicated at this point for three
seconds. After three seconds, the display changes to the pitch rating again.
Indicates the time played in M(inutes), S(econds) and F(rames).
Indicates the name of the artist, title and folder (for a MP3-CD).
The display indicates "Total Remain". The total remaining time of the entire
CD is displayed. The bar diagram decreases from left to right; when reaching
the final point the entire bar flashes until the CD ends.
The display indicates "Remain". The remaining time of the current track is
displayed. The bar diagram decreases from left to right; when reaching the
last digit, the entire bar flashes until the track ends.
The display indicates "Elapsed". The time passed of the current track is
displayed. The bar diagram increases from left to right; if the bar is complete,
the entire bar flashes until the track ends.
Is indicated when activating the Auto BPM Counter.