Maintenance And Cleaning - Renkforce 808751 Bedienungsanleitung

• If you prefer to use WLAN in order to connect to your home network, navigate to the
menu "Network" and then to "WLAN Set-up". The available WLAN networks will
be indicated in the list automatically. Select your network and enter your password.
Restart and the configuration is complete. It takes only seconds until the WLAN
connection to your router is established. You can turn the connection off at any
time using the button at the side. The box resets itself automatically to the default IP
address.
Attention. Once you have connected the machine to your network via LAN
or Wi-Fi, you will only be able to access it directly with your home network.
Once you have separated the LAN or WLAN connection, direct access via
WLAN will be possible again. The current IP address of the box is always
displayed on your TV.
Streaming
You can stream media contents from almost every device to the box. This requires that
your device be connected to the box either directly via Wi-Fi, or over your home net-
work. This is easiest with the app "AirFun". This is available for Android (App Store),
Apple iOS (App Store) and PC (included CD or on your device). In addition, the function
"AirPlay" is supported by Apple products. Here you can switch during playback from
any standard player directly to the box.
• Install the app on your device. To do this, follow all of the instructions. Before you
start the app, make sure that your device is connected to the box.
• The app is basically self-explanatory. On Android and iOS, you can select the de-
sired contents via hack to stream. Use drag & drop at a computer. Simply drag a
media file onto the respective field in the software and playback will start.
"PC2TV"
With this function, you can use the desktop of your computer to, for example, mirror or
expand your TV screen. To be able to use it, your computer must be connected to the
box either directly via Wi-Fi or over your home network. You also need to install the
software "ScreenShare" included on your CD.
• First, install the software from the CD supplied. Follow all instructions.
• Before you start the software, make sure that your computer has a connection to
the box. If the device is not connected to your home network, you must connect
directly via Wi-Fi, to the SSID "NTV300 XXX".
• The correct device in the list is usually already selected at the start of the software.
If this is not the case, choose the correct one, which is shown on your TV screen,
from the drop-down menu.
• Re-enter the "Login Code" that appears on your downstairs TV. Confirm with "OK".
• After preferences have been set up, click the play button in the software to start
the connection. Once the connection is established, the image you want on your
computer should already be displayed on your TV.
"Miracast"
This function mirrors the contents of your Android device e.g. on your TV. To do this,
your Android device must support this function.
Attention. Before you can use the function, you must first disconnect all
active connections to the box! The Wi-Fi or LAN connection to your router
can remain active.
• To use "Miracast", activate the function on your Smartphone or Tablet and wait until
the connection is established.
• After a short time, the contents shown on the display of your Android device should
show on your TV.
When using older devices, establishing a connection may take longer.
Resetting to Factory Settings
Switch on your device and wait until the start-up process has completed.
• Using a sharp object such as a paper clip, press the recessed reset button on the
bottom for approx. 3 seconds.
• Release only after the word "Factory Default" is shown on the left at the top on your
screen, if you haven't customized your language settings yet.
• The device restarts and is then reset to factory settings.
Declaration of Conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare
that this product conforms to the fundamental requirements and the other relevant
regulations of the directive 1999/5/EC.
The Declaration of Conformity for this product is available at
www.conrad.com.
Maintenance and Cleaning
The product is maintenance-free. Maintenance or repair work may be performed only
by qualified personnel or a specialised repair shop. The product contains no parts that
require servicing. Therefore, do not open it.
To clean the outside of the product, a dry, soft and clean cloth is sufficient.
Dust can easily be removed using a clean, long-haired brush and a vacuum cleaner.
Do not use abrasive cleaning agents, cleaning alcohol or other chemical
solutions, since these could damage the housing or even impair operation.
Disposal
Electrical and electronic equipment do not belong in your regular household
waste.
Dispose of the waste product in accordance with the applicable legal regu-
lations.
Technical Data
a) Streaming box
Power supply ...................................... via external power adapter
Operating voltage............................... 5 V/DC
WLAN ................................................... 802.11a/b/g/n (max. 300 Mbit), dual band 2.4 GHz /
Ports ..................................................... RJ45 10/100 Mbit, HDMI
Dimensions (W x H x D)..................... 85.5 x 26 x 65 mm
Weight .................................................. 81 g
b) A/C power plug
Operating voltage............................... 100 - 240 V/AC, 50 - 60 Hz, 0.3 A
Output................................................... 5 V/DC, 1 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
5 GHz
1080p, CVBS (AV) 480i,
®
USB2.0 (for firmware update)