Technical Data; Items Supplied; Depth Adjustment - Hilti DC-EX125 Bedienungsanleitung

Technical data

Weight:
Dimensions (l×w×h):
Disc diameter:
Pivoting connector for Hilti-type and other standard extraction systems
Cutting position mark (for cutting accurately to a line)
Two wheels for easy advance
Assembling the system
Fitting the connector
Push the connecting piece
dust extraction hood (engages with a click). Fit the connec-
tor to the connecting piece (pivotable).
Opening the extraction hood
■ Bring the locking / opening knob
position and unscrew it completely.
■ Push the locking / opening knob down firmly
hood can then be opened
Fitting the hood to the tool
■ Press the spindle collar of the tool, against spring
pressure, into position in the dust extraction hood
as illustrated.
■ When the dust extraction hood (opening has locating
lugs) has been felt to engage in the correct position,
the hood can be secured to the tool by turning it against
the direction of rotation and into its final position
Fitting the disc
■ Place the clamping flange
electric tool and then fit the diamond cutting disc
observing the correct direction of rotation (indicated
by the arrow). Screw on and tighten the clamping nut
or Kwik-lock nut . (Please refer to the operating
instructions for the electric tool.)
■ Close the dust extraction hood by bringing the two
halves of the hood together

Depth adjustment

■ Select the desired depth
knob .
■ Connect the dust extraction system
Caution
The locking knob must always be tightened securely
before beginning work in order to prevent the hood from
opening by itself.
6
Printed: 07.07.2013 | Doc-Nr: PUB / 5069489 / 000 / 00
into the opening in the
to the 20 mm
. The
.
.
on the spindle of the
,
.
and tighten the locking
.
0.8 kg
195×60×185 mm
125 mm
Fitting the side handle
■ The side handle can be screwed into the threaded
sleeves provided on either side, for use by left-han-
ded or right-handed persons.
■ The side handle must always be fitted when the dust
extraction hood is in use.
Removing the disc
■ Open the hood (as described at "Opening the hood").
■ Remove the diamond cutting disc
unscrewing the clamping nut or Kwik-lock nut
Remove the clamping flange
■ Press the release button
the electric tool. The hood can then be removed from
the tool by turning it to the right (please refer to
the symbol on the casing of the hood).

Items supplied

DC-EX 125 dust extraction hood, connector for Hilti
extraction system, connecting piece for Hilti-type connec-
tor, operating instructions
by releasing and
.
.
at the spindle collar of