Makita DTW1001 Betriebsanleitung Seite 8

Impact force grade displayed on
panel
Soft
Impact force/bolt size corresponding chart (reference)
Impact force grade displayed on
panel
Hard
Medium
Soft
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Selecting correct impact socket
to the bolt or nut.
Installing or removing impact socket
Only for Model DTW1001,DTW1002 (optional
accessory)
CAUTION:
Make sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
For impact socket without O-ring
and pin
Fig.9: 1. Impact socket 2. Square drive
drive and push the impact socket onto the square drive
Maximum blows
DTW1001 DTW1002
-1
1,800 min
DTW1001
Standard bolt High tensile
bolt
M20 - M30 M16 - M24
M16 - M24 M12 - M20
M12 - M20 M10 - M16
-
8 ENGLISH
DTW800
small diameter bolt.
DTW1002
Standard bolt High tensile
bolt
M20 - M30 M16 - M24
M16 - M24 M12 - M20
M12 - M20 M10 - M16
For impact socket with O-ring
and pin
Only for Model DTW1001
Fig.10: 1. Impact socket 2. O-ring 3.
Move the O-ring out of the groove in the impact socket
and remove the pin from the impact socket. Fit the
impact socket onto the square drive so that the hole in
the impact socket is aligned with the hole in the square
drive.
Insert the pin through the hole in the impact socket and
tion in the impact socket groove to retain the pin.
procedures in reverse.
Installing or removing drill bit/
socket adapter
Only for Model DTW800 (optional accessory)
Fig.11
Fig.12: 1. Drill bit 2. Sleeve
the arrow and insert the drill bit into the sleeve as far as
it will go.
the arrow and pull the drill bit out.
Application
DTW800
Standard bolt High tensile
bolt
M20 - M24 M16 - M22
M14 - M20 M10 - M16
M12 - M16 M10 - M12
-