Frequently Asked Questions - Lumie Bodyclock active 250 Bedienungsanleitung

BCAci1107:Layout 1 14/7/11 17:45 Page 16
English

Frequently asked questions

I tried out the sunrise but the light comes up really quickly;
what's wrong?
You probably didn't allow enough time for a full sunrise. For example,
the default sunrise takes 30 minutes so if the clock shows the time
as 11.00 then you need to set the wake-up time to at least 11.30.
What happens when I unplug my Bodyclock Active or there's a
power cut?
Your Lumie Bodyclock Active keeps time for one hour; other
settings are permanent, so you won't need to reprogram the unit,
just plug it back in. If you need to adjust the time, see Time and
wake-up time.
The display panel is too bright when I'm trying to sleep; how
can I change it?
See Display brightness for auto-dimming options.
What can I do if the display is working but the light doesn't
come on?
Check to make sure the bulb is firmly screwed into the socket. If this
doesn't work, replace the bulb.
Why is nothing happening when I press the buttons?
You may have accidently set the unit to demonstration mode (only
useful for shops, exhibitions etc!) so try pressing + for 12 seconds. If
RESET
that doesn't work or if the display shows , see How do I
restore the default factory settings?
16 | www.lumie.com