KERN MPE-HM Betriebsanleitung Seite 101

3. Data output format
4. Printer type
After the data output format has been confirmed, the currently set
printer type will be displayed.
Select the desired printer type by
LP -50
tPUP
bl on
bl oFF
Background
illumination
bl AU*
Str on
Str oFF*
Subsequent tare
value
locked in devices
with type approval
certificate.
MPC_M / MPE_HM / MPE_PM-BA-e-1414
(P Prt, P Auto, P Cont settings only)
the currently set data output format will be shown after the
baud rate was confirmed. Select desired format by
confirm with .
Prt 0-3 Data output format, see chap. 13.
Cont 1 Default
Cont 2 Not documented
Cont 3 Not documented
Not documented
Use this setting
Back lighting for display on
Display background illumination off
Backlighting for display will come on automatically as
soon as the weighing scale is operated.
Subsequent tare ON
Subsequent tare OFF
and
Sd0 – on/off
Cont. data outputselectable
„send 0", yes / no
and confirm by .
43