Important For Usb Mass Storage Class Devices - JVC RV-NB75B Bedienungsanleitung

Important for USB mass storage
class devices
For connecting/disconnecting:
Disconnect the USB device after playback stops.
0
Disconnecting the USB device during playback
may damage the file and the file system of USB
device.
When connecting with a USB cable, use a USB
0
2.0 cable less than 1 m in length.
You cannot connect a computer to the USB
0
MEMORY terminal of the System.
Do not use a USB hub.
0
When the power is supplied through the AC
0
outlet and USB is selected as the source, the
USB device is charged through the USB
MEMORY terminal.
Deactivate the security function of the USB
0
device before connecting.
For playing back:
The playing order of MP3/WMA files
0
‒ Groups are played in creation order. In a
group, tracks are played in recording order.
‒ The playing order may change if you change
a folder name or file name on the PC.
You cannot play back a file larger than 2
0
Gigabytes.
It is recommended to use USB mass storage
0
class devices that are less than 32 GB.
If your USB device is partitioned, only the first
0
partition is recognized.
Some USB devices may not be recognized or
0
may not work properly.
Copyrighted tracks (WMA-DRM tracks) cannot
0
be played back on the System.
Electrostatic shock at connecting a USB device
0
may cause abnormal playback of the device. In
this case, disconnect the USB device then reset
this System and the USB device.
JVC bears no responsibility for any loss of data
0
on the USB mass storage class device while
using this System.
28