Other Information; Laser Information - Sharp MX-M654N Startanleitung

• The format, exposure, and resolution settings of transmitted
and received data remain in effect when the data is
forwarded.
• When forwarding is enabled for data sent in fax mode,
• The [Direct TX] key does not appear in the touch panel.
• Quick online transmission and dialing using the speaker
cannot be used.
Points to notice when connecting to the
network
When connecting the machine to the network, do not directly connect
to the internet but to the sub network (range divided by the router) in
which only the authorised device (such as PC) for the communication
with the machine in the protected LAN in some way like firewall is
connected. And manage the connected devices in the sub network so
that the network condition may always be maintained. Also use the
filter setting function to prevent illegal access.
SOFTWARE LICENCE
The SOFTWARE LICENCE will appear when you install the software
from the CD-ROM. By using all or any portion of the software on the
CD-ROM or in the machine, you are agreeing to be bound by the
terms of the SOFTWARE LICENCE.
• The explanations in this manual assume that you have a working
knowledge of your Windows or Macintosh computer.
• For information on your operating system, please refer to your
operating system manual or the online Help function.
• The explanations of screens and procedures in this manual are
primarily for Windows 7 in Windows
may vary depending on the version of the operating system.
• Considerable care has been taken in preparing this manual. If you
have any comments or concerns about the manual, please contact
your dealer or nearest authorised service representative.
• This product has undergone strict quality control and inspection
procedures. In the unlikely event that a defect or other problem is
discovered, please contact your dealer or nearest authorised
service representative.
• Aside from instances provided for by law, SHARP is not responsible
for failures occurring during the use of the product or its options, or
failures due to incorrect operation of the product and its options, or
other failures, or for any damage that occurs due to use of the
product.
This product is designed for commercial application only and as
such it falls outside the scope of Regulation (EC) 1275/2008
implementing EU Directive 2005/32/EC on eco-design requirements
for standby and off mode electric power consumption. Sharp does
not recommend the product for domestic application and will not
accept any liability for such use.

OTHER INFORMATION

Laser information

MX-M654N/MX-M754N
Wave length
792 nm + 8 nm/-12 nm
MX-M654N
Normal paper mode/Heavy paper mode
(P/S=330 mm/s) = 6.43 μs ± 0.015 μs / 7mm
MX-M754N
Pulse times
Normal paper mode (P/S=360 mm/s) =
5.90 μs ± 0.014 μs / 7 mm
Heavy paper mode (P/S=330 mm/s) =
6.43 μs ± 0.015 μs / 7 mm
MX-M654N/MX-M754N
Output power
Max 1.4mW (LD1+LD2+LD3+LD4)
Caution:
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1
Edition 2-2007).
environments. The screens
®
Noise emission
The following shows noise emission values as measured according to
ISO7779.
Sound power level L
Operating (continuous
printing)
Standby mode (Low power
level mode)
Sound pressure level L
Operating
Bystander
(continuous
positions
printing)
Standby Bystander
mode positions
• Operating: with option MX-FN19+MX-RB23+MX-LC15.
• Standby: "-"=less than background noise.
Warranty
While every effort has been made to make this document as accurate
and helpful as possible, SHARP Corporation makes no warranty of
any kind with regard to its content. All information included herein is
subject to change without notice. SHARP is not responsible for any
loss or damages, direct or indirect, arising from or related to the use of
this operation manual.
© Copyright SHARP Corporation 2014. All rights reserved.
Reproduction, adaptation or translation without prior written
permission is prohibited, except as allowed under copyright laws.
Wireless LAN
The communication range of wireless LAN may shorten or
communication may not be possible in some usage environments, due
to shielding materials, the installation location, the effects of ambient
radio noise, data transmission speed, and other factors.
Document filing
The machine includes the document filing function, which stores
document image data on the machine's hard drive. Stored documents
can be called up and printed or transmitted as needed. If a hard drive
failure occurs, it will no longer be possible to call up the stored
document data. To prevent the loss of important documents in the
unlikely event of a hard drive failure, keep the originals of important
documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation
bears no responsibility for any damages or loss due to the loss of
stored document data.
This machine contains the software having modules developed by
Independent JPEG Group.
Copyright© 1995-2007 Adobe Macromedia Software LLC. All rights
reserved.
This product includes the Adobe
Incorporated.
This product uses "InstantBoot" provided by IT Access Co., Ltd.,
Japan.
6
WAd
MX-M654N
7.8 B
-
pAm
MX-M654N
59 dB
31 dB
PostScript 3™ of Adobe Systems
® ®
MX-M754N
7.8 B
-
MX-M754N
60 dB
31 dB