Pioneer MRX-3 Handbuch Seite 26

0 If the device being used (wireless LAN router,
etc.) is too far from the unit, or if there is an
obstacle between them, improve the Wi-Fi
performance by closing the distance between
them, for example.
0 Avoid using devices that generate
electromagnetic waves, such as a
microwave.
0 If your Wi-Fi network covers areas near
devices that generate electromagnetic
waves, keep the unit away from these areas.
Firmware update does not complete
∫
successfully
If you updated the unit from an app, if an error
code is displayed on the screen of the app or the
Wi-Fi indicator on the unit lights red, the update
did not complete successfully. Press STANDBY/
ON on the unit to turn the unit off and then on
again, then restart the app. The unit restarts and
the update starts again automatically about a
minute later. Alternatively, if the update icon is
displayed again in the app, tap the icon to restart
the update. The Wi-Fi indicator on this unit
flashes blue during the update. When the
EN
26