Herunterladen Inhalt Inhalt Diese Seite drucken

Controlling The Cd Mechanism; Selecting A Track By Number - T+A Elektroakustik CD 1260 R Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Controlling the mechanism
 Selects the previous track during playback.
 Starts playback, selects the next track during
playback.
 Fast rewind to search for a particular
passage.
 Fast forward to search for a particular
passage.
After about 2 seconds the outputsignal is
muted.
During the search process the elapsed time
for the current track is shown on the left-hand
side of the screen. If the search reaches the
start or end of the CD, it halts.
 Ends
playback;
message: 'STOP'.
Opens and closes the CD drawer to STOP
mode.
 Pressing the  button briefly during
playback interrupts the current track; the
screen shows the message: 'PAUSE'.
A second press on the  button, or
pressing
the
playback.
Starts playback.
This button is used to store a MEMO
program. If you are operating the menu
control system the 
used as a confirmation button.
only F1 / F6a-remote control handset:
Brief press:
Selects the playback modes RPT TRACK /
RPT ALL / RPT OFF
Long press:
Switch Mix mode on and off
Subsequent brief press:
Selects Mix mode MIX / RPT MIX
Brief press:
Selects the digital filter (see 'Front panel
controls, 
 ')
Long press:
A long press toggles between normal and
inverted signal phase (see 'Front panel
controls, 
 ').
This button switches between the display
    
modes of the CD player.
the
screen
shows
the
button,
resumes
 button is also
Selecting tracks by number
Numeric buttons
Numeric input for direct selection of a track
number.
When you press a numeric button (e. g.
 ) the screen shows the message:
.
.
.
For a period of about 3 seconds a marker
.
flashes. During this time you may
.
press a second numeric button to
complete a two-digit track number - the
machine
immediately.
or press the 
assumed to be a single-digit track
number
selected track immediately.
If you do not press a second button and
the 3-second period is over, the input is
assumed to be a single-digit track
number - the machine plays the selected
track.
Note:
Even when the CD drawer is open a track
number can still be entered directly. The
drawer
then
playback starts with the selected track.
37
'SELECT 1-'.
plays
the
selected
 button; the input is
the
machine
plays
closes
automatically
track
the
and

Werbung

Kapitel

Inhaltsverzeichnis
loading

Verwandte Produkte für T+A Elektroakustik CD 1260 R

Inhaltsverzeichnis