Creating A Memo Program; Playing A Memo Program; Erasing A Memo Program - T+A Elektroakustik CD 1260 R Betriebsanleitung

Creating a MEMO program

Explanation:
A MEMO program can store up to 30 tracks of a CD in
any sequence, e.g. for making a cassette recording. The
MEMO program can only be created for the CD currently
in the machine. It remains stored in the CD player until
either you erase it or the CD drawer is opened.
Procedure:
When you insert the CD the screen displays the
message 'STOP' followed by the total number of tracks
on the CD.
Activate MEMO programming.
•
Hold the 
pressed in for about one second.
The screen shows: 'PROG' and a number as an
invitation to enter information.
Press   or   front panel buttons / 
   
•
or  remote control buttons repeatedly until the
number of the desired track appears on the screen
after 'PROG'.
Now store the track in the MEMO program by
•
pressing the   button briefly.
 
Playing back a MEMO program
The MEMO program can now be played back.
Start playback process
•
Playback begins with the first track of the MEMO
program. While the MEMO program is in progress the
screen shows a letter 'P' in front of the current track
number.

Erasing a MEMO program

Pressing the   button briefly in STOP mode opens
 
the CD drawer, and this action erases the MEMO
program.
A MEMO program can also be erased without opening
the CD drawer:
 remote control button
 
 /   button

   
The track number flashes once to confirm that this track
has now been accepted as the first track in the MEMO
programme. Select all the remaining tracks in the same
way, and store your choice by pressing the 
button.
Note:
The track you wish to select can also be entered directly
using the numeric buttons instead of the 
 front panel buttons /  or  remote
  
control buttons. After entering the number, store the
track as described above by briefly pressing the 
button.
When you have stored the 30th track the screen shows
the message 'FULL'. Other tracks are ignored.
When you have stored all the tracks you wish to include
the MEMO programming procedure is ended as follows:
End MEMO programming.
•
Hold the 
While the MEMO program is running, the 
 front panel buttons /  or  remote
  
control buttons select the previous and next tracks
respectively, but only within the MEMO program.
34

 
 or
 
  
 remote control button
 
pressed in for about one second.
 or
 