Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Playing a CD
Open the CD drawer
•
Place the CD in the drawer, printed face up
•
Close the CD drawer
•
Immediately after you close the drawer the CD player
reads the Table of Contents of the disc; the screen
shows the message 'READING', and during this period
the unit ignores any button-presses.
After this period the screen displays the current
operational mode and the total number of tracks on the
CD in the machine, e. g.: 'STOP 16'.
Start the playback process
•
Playback begins and the screen shows the operational
state and the number of the currently running track:
'PLAY 01'.
At the end of the final track the CD stops playing and the
screen shows 'STOP' again, together with the total
number of tracks on the CD.
Variations:
If you press the
button after placing a CD in the
drawer, the drawer closes and playback starts with the
first track.
You can interrupt playback at any time by pressing the
button. During the interruption the screen shows
the message 'PAUSE'.
Playback continues when you press the
button again.
If you press the
button briefly during playback,
the player jumps to the start of the next track.
Pressing the
button briefly during playback
causes a jump to the start of the previous track. If the
button is held pressed in, the machine jumps back
several tracks.
Pressing the
button briefly halts the playback
process; screen display: 'STOP'.
Pressing the
button briefly opens the CD drawer.
Direct control of the CD player
(
button)
(
button)
(
button)
or
Track selection
During playback
Press the
or
number of the track you wish to play appears on the
screen after the 'PLAY' message.
Playback is interrupted briefly when you release the
button; and then the track you have selected is played.
Note:
You can also enter the number of the track you wish to
listen to directly using the numeric buttons on the remote
control handset.
Repeating a passage (A-B)
The first step is to search for the starting point of the
passage you wish to repeat:
The screen shows a flashing letter 'A' in front of the
current track number inviting you to set the start marker:
'PLAY AB 08'.
Press the
button briefly to set the start marker.
After a short period you will see a flashing letter 'B',
inviting you to set the end marker: press the
button again at the end of the passage you wish to
repeat.
The CD player now repeats the passage between the
two markers until you press the
buttons
and
repeating the passage.
Notes:
You can use the fast forward / rewind buttons
•
and
to search for the start and end points of
the passage.
32
button repeatedly until the
button. The
resume playback without
Werbung
Kapitel
Inhaltsverzeichnis
