T+A Elektroakustik CD 1260 R Betriebsanleitung Seite 26

Welcome.
We are delighted that you have decided to purchase a 
quality piece of equipment which has been designed and developed with the wishes of the audiophile music lover as
absolute top priority.
This system represents our very best efforts at designing practical electronic equipment incorporating solid quality, user-
friendly operation and a specification and performance which leaves nothing to be desired.
All these factors contribute to a piece of equipment which will satisfy your highest demands and your most searching
requirements for a period of many years. All the components we use meet the German and European safety norms and
standards which are currently valid. All the materials we use are subject to painstaking quality monitoring.
Our production areas are supervised by highly qualified, expert staff, and all our products are checked comprehensively
by a fully automated, computer-controlled system to ensure uniformly high quality. At all stages of production we avoid
the use of substances which are environmentally unsound or potentially hazardous to health, such as chlorine-based
cleaning agents and CFCs. We also aim to avoid the use of plastics in general, and PVC in particular, in the design of
our products.
Instead we rely upon metals and other non-hazardous materials; metal components are ideal for recycling, and also
provide effective electro-magnetic shielding. The robust, all-metal cases which we use offer a real and practical
advantage, since they exclude any possibility of external sources of interference affecting the quality of reproduction.
From the opposite point of view our products' electro-magnetic radiation (electro-smog) is reduced to an absolute
minimum by the outstandingly effective screening provided by the metal case.
The compact nature of the system is due to the careful concentration of proven sub-assemblies, taking the principle
close to the limits of what is currently feasible, without making compromises in terms of circuit design and performance.
We would like to take this opportunity to thank your for the faith you have shown in our company in purchasing this
product, and wish you many hours of enjoyment and sheer listening pleasure with your  system.

elektroakustik GmbH & Co KG
All the components we use meet the European safety norms and standards which are currently valid. The

operation instructions, the connection guidance and the safety notes are for your own good - please read them
carefully and observe them at all times.
This product complies with the Low Voltage Directive (73/23/EEC), EMV Directives (89/336/EEC, 92/31/EEC) and CE
Marking Directive (93/68/EEC).
IMPORTANT! CAUTION!
This product contains a laser diode of higher class than 1. To ensure continued safety, do not
remove any covers or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appear on your device:
Rear Panel:
CLASS 1
LASER PRODUCT
On the inner protective housing of the CD mechanism
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
CAUTION:
AVOID EXPOSURE TO BEAM
VORSICHT: SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG,
WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETZEN
RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS
ATTENTION:
D'OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
DANGER:
AVOID DIRECT EXPOSURE TO BEAM
 product. With your new CD-Player you have acquired a top-
 
26