Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
/
This button is used to store, change and check a MEMO
program.
Pressing this button sets one of two time markers (A and
B) on the current CD. The passage between the two
markers can then be repeated as often as you wish by
pressing the
button again.
This button switches the phase of the signal from normal
to inverse phase and back. When you press the
button the screen displays the current phase -
'NORMAL' or 'INVERTED' - for a period of about one
second.
The human ear is certainly capable of detecting absolute
phase when listening to particular instruments and
voices.
However, absolute phase is not always correct on
commercial recordings, and in this case you can invert it
(i. e. turn it through 180° ) by pressing this button.
The correction occurs at the digital level and therefore
has no effect at all on sound quality.
Note:
The symbol on the screen glows continuously when
INVERSE mode is switched on.
Pressing this button causes the currently active digital
filter to be displayed on the screen for a period of about
one second, e. g.: 'FIR LONG'.
During this period pressing the
calls up and selects the available digital filters in turn. For
more information on filters please refer to the Section
'Technical description, Digital filters / Oversampling'.
Note:
A continuously glowing code number (1 ... 4) on the
screen indicates the active filter. If no number is lit, the
standard filter is active.
button repeatedly
This button switches the display modes of the CD player.
The following options are available:
1. Track display:
The screen shows the operating mode and the
current track number, e.g 'PLAY 3'.
2. Track time display:
The elapsed playing time of the current track is
displayed instead of the operating mode 'PLAY', e.g.
'3,30
12'.
3. Remaining track time display:
The remaining playing time of the current track is
displayed instead of the operating mode 'PLAY', e.g.
'1,25
12'.
4. Disc time display:
The elapsed playing time of the disc is displayed
instead of the operating mode '10,30
5. Remaining disc time display:
The remaining playing time of the disc is displayed
instead
of
the
'15,30
8'.
Note:
The disc time and remaining disc time display modes are
not available when the machine is playing a Memo
programme.
Screen brightness adjustment.
On the CD-Player the brightness of the screen can be
set to any of three values to suit your personal
preference. This is done by pressing the
the following brightness values are available:
1. Normal setting:
Easy to read even by day and in sunlight
2. Darkened:
Subdued setting, for darker ambient conditions
3. Screen switched off:
The screen is switched off completely
If you set brightness level 2 or 3 the screen is activated
briefly every time you change a setting, and switches to
normal brightness. This makes it easier to check the
settings even from some distance. After about four
seconds the screen switches back automatically to the
previously selected brightness value.
29
5'.
operating
mode
'PLAY',
button;
e.g.
Werbung
Kapitel
Inhaltsverzeichnis
