Place Television - Renkforce TT318 2.1 Bedienungsanleitung

• Insert a new button cell type CR2032. The positive terminal (+) must face outward.
• Replace the battery compartment cover and secure it with the previously removed screw.
Point the remote control always directly at the IR receiver (8).
Ensure that the IR receiver is not obstructed.

9. Place television

Make sure that the TV stands safely. At high volume, some TV sets may vibrate and fall over.
The product is not suitable for TV with narrow feet that concentrate the total weight on two small points. Use
only a TV with a single wide base that distributes the load over a large area.
• Place the television at the center of the product.
• Maximum permissible base dimensions: 60 x 30 cm (W x D)
• Maximum permissible weight: 50 kg
24