Set-Up - mivoc Hype 10 Aktiv Bedienungsanleitung

Set-Up

Do not set up your subwoofer right next to screens, such as TVs or computer screens. There
is a danger of the speaker's magnetic field causing image distortion.
When selecting the set-up site, observe that direct sunlight, vibration, dust, heat, cold and
moisture must be avoided. There also must not be any strong transformers in the device's
proximity.
Ensure sufficient ventilation when setting up the device with other equipment. Keep sufficient
distance to heat sources. Never put up the subwoofer in direct proximity in of heat sources like
an amplifier. Never point any strong spotlights and light sources at the device. This may cause
overheating (danger of fire!).
The device's heat dissipation must not be impaired. Never cover the casing. Air circulation
must not be impaired by objects like magazines, tablecloths, curtains, etc. This prevents heat
dissipation from the device and may lead to overheating (danger of fire!).
Only operate the subwoofer on a stable base that is not susceptible to heat.
Do not drill or screw any additional screws into the casing to mount the device. This may expose
dangerous voltage to touch.
Make sure that the connection cables are not squeezed or damaged by sharp edges. Always
place cables so that no one can trip over them or be caught in them. There is a risk of injury!
The cables must be sufficiently long. Do not put any mechanic strain on them. This may damage
the cables or device. There is a risk of dangerous electric shock.
Ensure secure and stable set-up. The device is heavy and therefore poses considerable danger
of accidents. Secure the device with additional attachment means if required.

Due to the diversity of furniture paints and polishes used, it is possible that the device's feet will leave
visible residue on furniture due to chemical reaction. The device therefore should not be placed on
valuable furniture surfaces without any suitable protection.
24