Intended Use; Explanation Of Symbols - mivoc Hype 10 Aktiv Bedienungsanleitung

Intended Use

The MIVOC Hype 10 active subwoofer is used to amplify audio signals from audio systems and to convert them into
audible sound waves via the integrated speakers.
The input must only be connected to low-level audio outputs or speaker outputs of audio devices.
The power supply must only be connected to 230 V/50 Hz or 115 V/60 Hz alternating voltage.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided.
Any other use than that described above will lead to damage to the product and involves other risks, such as short
circuit, fire, etc.
No part of the product must be modified or converted in any way and the casing must not be opened.
The safety information must be observed at all times.
Observe all safety and assembly notes in these operating instructions!

Explanation of Symbols

This symbol on the device indicates that the user must read these operating instructions before
using the product and observe them during operation. The exclamation mark indicates
important notes in these operating instructions that must be strictly observed.
The lightning symbol in a triangle warns against unprotected live components or elements
inside the housing or "live" connection points. Touching these components or connection
points may pose a danger to life.
Lines must only be connected to such connection points by specialists, or lines ready for
connection must be used.
The device contains no parts that require servicing. Therefore, never open the device.

The hand symbol is used where special advice and notes on operation are provided.
20