Error Codes - Omni Instruments Manoair 500 Bedienungsanleitung

ManoAir500

Error Codes:

E.01 = over pressure measuring range (+)
= below pressure measuring range (-)
- E.01
= over temperature measuring range (+)
E.02
= below temperature measuring range (-)
- E.02
= test time exceeded (+)
E.03
E.04 If one of these error codes appears, an internal mall
E.05 function of the measuring instrument has happened. Turn
off the instrument. If one of these error codes appears
E.06
E.07 again after switching on the instrument then you should
send it back for control or repair.
E.08 = over velocity measuring range (+)
E.09 = over barometer measuring range (+)
E.11 = over humidity measuring range (+)
E.12 = over flow measuring range (+)
42 Schiltknecht Messtechnik AG