Keys; On/Off; Flow - Omni Instruments Manoair 500 Bedienungsanleitung

ManoAir500

Keys:

Functions:
The measuring instrument is switched on and off with the
"On/Off" key.
With the Mini2Logger connected and switched on, the "On/Off"
key is used for transferring and saving individual measured values.
The differential pressure is displayed with the key "∆ ∆ ∆ ∆ p".
A differential pressure must already be displayed in order to change
between the indicated units of measurement (Pa, mbar, mmH
The selected unit remains saved, also after the instrument is
switched off.
The rate of flow is displayed with the key "Flow".
A flow rate must already be displayed in order to change between
the indicated units of measurement (m/s, l/min, m
If the symbol "F" flashes in the display with unit of measurement
3
m /h, the flow rate is indicated in standard cubic.
The selected unit remains saved, also after the instrument is
switched off.
The temperature of the external temperature sensor is
displayed with the key "Temp".
(This key is disabled if no sensor is connected)
If the key "Temp" is pressed for a long time (ca. 2 sec.), the display
shows the type of thermoelement in use (E, J, K, T). The
thermoelement in use can now be changed with the keys "Max"
and "Min" The selection is terminated and saved by pressing the key
"Temp" again.
Pressing the key "Temp" twice displays the relative Humidity
of the external humidity sensor.
(This key is disabled if no sensor is connected)
32
3
/h).
Schiltknecht Messtechnik AG
O)
2