Special Modes - Omni Instruments Manoair 500 Bedienungsanleitung

ManoAir500

Special modes:

If the following keys are held pressed whilst switching on, the instrument
switches to a special mode:
Keys: Functions:
If the "Rep" key is already pressed whilst switching on with
the "On / Off" key, the display shows the maximum averaging
time of 7200 sec.
With the "Rep" key this maximum value can now be reduced in
1800 sec. steps. Fine settings between these steps can be made with
the keys "Max" or "Min".
Example:
You require an averaging time of 55 min. (3300 sec.)
With an indication of 7200 sec. You press the "Rep" key 2 x
(indication 3600 sec.) now press the "Min" key until the
averaging time of 3300 sec. Is displayed.
Save this averaging with the key "∆p".
Resetting to the default value of 6 sec. takes place when the
instrument is switched off and back on.
Display:
Normally the instrument display indicates a 2 - sec. mean value, which is
renewed every 0.5 sec.
Exception: If the instrument is in the high resolution mode (resolution of 0.05%
of upper limit for pressure within +/- 10% of upper limit), the displays shows a
20 sec. mean value.
36 Schiltknecht Messtechnik AG