EuroLite D-4 Bedienungsanleitung Seite 11

DESCRIPTION
Frontpanel:
1) Power switch
2) DIMMER-button
3) ORGAN-button
4) SHOW-button
5) P.AUTO-button
6) AUDIO-button
7) MASTER-fader
With the master-fader you can adjust the total output level of all four channels
8) BACKGROUND-fader
With the background-fader you can adjust the minimum output level of all four channels (background).
9) FULL-button
With this button, all channels are flashed as long as the button is pressed.
10) B.OUT-button
With this button, all channels are cut off (blackout). The blackout-function also has to be switched off with
the B.OUT-button.
11) CHANNEL-faders
Chanel-faders of the channels 1-4 for individual control of every channel.
12) FLASH-buttons
Flash-buttons of the channels 1-4 for flashing the desired channel.
13) AUDIO LEVEL-control
For adjusting the sound-sensitivity.
14) RUNNING SPEED-control
For adjusting the program-speed.
15) STOP-button
For stopping the program-run.
16) DISPLAY
The display shows the current program-number.
17) PRG. UP/DOWN-buttons
For selecting the desired program.
18) STEP-button
After pressing the Stop-button, you can select the desired step of a program with this button.
19) START-button
With the Start-button, you can return to the first step of a program.
20) BEAT-button
If the Beat-function is activated, the outputs pulse with one channel. The pulse-speed is either sound-
controlled (Audio-button pushed) or speed-controlled (Running Speed-control).
21) Fuseholders
11