Technical Specifications; Troubleshooting; Warranty And General Terms And Conditions - Texas A/S Smart Sweep 800 Bedienungsanleitung

Technical specifications

Model
Total width (mm)
Working width (mm)
Weight (kg)
Brush diameter (mm)
Brush speed (rpm)
Gears
Swivelling brush (positions)
Speed (km/h)
Tyre size
Tyre pressure in PSI
Sound LwA
Sound LpA
Vibrations

Troubleshooting

Problem Solution
The engine does not start:
1. Check for sparks in the sparkplug
2. Check that the sparkplug terminal is
correctly fitted.
3. Check that the engine is equipped
with an ignition switch
(this must be activated).
4. Check that the engine is equipped
with a fuel cock
(this must be activated).
The engine runs irregularly:
1. Check that the choke is switched
off.
2. Check that the fuel is free of
impurities.
Brushes will not operate:
1. Check that the clutch is adjusted
correctly.
2. Check that the V-belt is tight.
Machine will not operate:
1. Check that the clutch is adjusted
correctly.
2. Check the V-belt.
The machine does not sweep properly:
1. Check the distance from the brush
to the ground.

Warranty and general terms and conditions

The warranty period begins from the date of
purchase and is valid for three years for private
users in Denmark, and two years in other EU
countries. Machines sold for commercial use
have a one-year warranty.
The warranty covers substandard
performance, i.e. manufacturing defects or
material or functional defects.
Smart Sweep 800
850
800
76
350
180-350
3 forward + 1 reverse
5
3
2.80/2.50-4
30
95.7 dB
84.50 dB
7.127m^s2
Qualifications and requirements
Normal wear and the replacement of worn
parts are NOT covered by the warranty.
Wearing parts where the warranty is NOT given
for longer than 12 months:
•
Cables
•
V-Belt
•
Fuses
•
Contacts
•
Diaphragms/gaskets
•
Spark plug
•
Engine liquids (oil, petrol)
•
Start cord
If you start the engine before the engine has been
filled with oil, it will become damaged, and any
repair will therefore not be covered by the
warranty.
The warranty does NOT cover defects or
deficiencies caused by the following:
•
Lack of service and maintenance
•
Design changes
•
The machine has been exposed to external
effects
•
Damage to the paint, damage to the guard,
handlebars, panels, etc.
•
The machine has been misused or overloaded
•
Other oil, fuel or liquid types have been
used other than the those recommended
in this user manual
•
Substandard or dirty fuel, contamination
of the fuel system
•
Fitting/use of non-original spare parts
•
Other conditions, for which Texas A/S is not
liable for
At all times, only an authorised service centre may
determine whether a case is a warranty case or
not.
Your purchase receipt is your proof of
warranty. Therefore it must never be
discarded.
Remember: When making a request a warranty
repair, always provide the model number, year
and serial number. This can be found on the CE
mark, which is on the guard behind the engine.
*We reserve the right to make changes and are
not responsible for any printing errors.
16