Siemens SCALANCE W784-1 Betriebsanleitung Seite 66

Description
3.2 Product properties
The following table shows the characteristics of the various model variants of the
SCALANCE W784-1xx / W74x-1:
Type Number of Number of
WLAN ports supported IP nodes
W784-1 1 several
W784-1RR 1 several
W744-1 1 1
W746-1 1 8
W747-1 1 8
(1) The iPCF mode provides an optimized data throughput and minimum handover times.
(2) US variant
Requirements for installation and operation
A PG/PC with a network attachment must be available to configure the SCALANCE W784-
1xx / W74x-1. If no DHCP server is available, a PC on which the Primary Setup Tool (PST)
is installed is necessary for the initial assignment of an IP address to the SCALANCE W784-
1xx / W74x-1. For the other configuration settings, a computer with Telnet or an Internet
browser is necessary.
60
Number of iPCF mode
(1)
supported MAC
nodes
several No
several Yes
1 No
8 No
8 Yes
SCALANCE W-784-1xx / SCALANCE W-74x-1
Operating Instructions (Compact), Release 08/2007, A5E01174713-02
Order No.
6GK5784-1AA30-2AA0
6GK5784-1AA30-2AB0
(2)
6GK5784-1AA30-6AA0
6GK5784-1AA30-6AB0
(2)
6GK5744-1AA30-2AA0
6GK5744-1AA30-2AB0
(2)
6GK5746-1AA30-4AA0
6GK5746-1AA30-4AB0
(2)
6GK5747-1AA30-6AA0
6GK5747-1AA30-6AB0
(2)