Specifications - Stihl HSA 65 Gebrauchsanleitung

Specifications

Battery
Type: Lithium-ion
The power tool can be operated with
STIHL type AP batteries.
Power tool running time depends on the
stored energy of the battery (e.g. 80 Wh
with AP 80 or 160 Wh with AP 160).
Charger
AL 100
Mains voltage: 220 - 240 V
Rated current: 0.6 A
Frequency: 50 Hz
Power consumption: 75 W
Charging current: 1.6 A
Insulation: II, E
AL 300
Mains voltage: 220 - 240 V
Rated current: 2.6 A
Frequency: 50 Hz
Power consumption: 320 W
Charging current: 6.5 A
Insulation: II, E
HSA 65, HSA 85
Charging Times
AL 100
with AP 80:
– up to 80% capacity: 70 min
– up to 100% capacity: 100 min
with AP 120:
– up to 80% capacity: 120 min
– up to 100% capacity: 140 min
with AP 160:
– up to 80% capacity: 150 min
– up to 100% capacity: 165 min
AL 300
with AP 80:
– up to 80% capacity: 25 min
– up to 100% capacity: 50 min
with AP 120:
– up to 80% capacity: 30 min
– up to 100% capacity: 60 min
with AP 160:
– up to 80% capacity: 35 min
– up to 100% capacity: 60 min
Cutting Attachment
Tooth spacing: 30 mm
Stroke rate (off load): 3,000/min
Cutting length:
– HSA 65: 500 mm
– HSA 85: 620 mm
Sharpening angle:
– HSA 65: 41°
– HSA 85: 45°
Weight
without battery, with cutting attachment,
without blade scabbard
HSA 65: 3.5 kg
HSA 85: 3.7 kg
Noise and Vibration Data
Noise and vibration data are determined
on the basis of the rated maximum
speed.
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L
p
DIN EN 60745-2-15
HSA 65: 83 dB(A)
HSA 85: 83 dB(A)
Sound power level L to
w
DIN EN 60745-2-15
HSA 65: 94 dB(A)
HSA 85: 94 dB(A)
Vibration measurement a
DIN EN 60745-2-15
Handle, left Handle, right
2
HSA 65: 2.2 m/s 1.6 m/s
2
HSA 85: 2.2 m/s 1.7 m/s
The K-factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration measurement.
English
to
to
hv
2
2
2
47