Switching Off - Stihl HSA 65 Gebrauchsanleitung

Make sure the cutting attachment is
N
not touching the ground or any other
objects.
Hold the unit with both hands – one
N
hand on the control handle – one
hand on the loop handle.
2
Unlock the power tool by moving the
N
retaining latch (2) to ‚.
3
4
Push the switch lever (3) against
N
the loop handle and hold it there.
Push down the trigger switch
N
lockout (4) and depress the trigger
switch (5) and hold them in that
position.
The motor runs only if the retaining
latch (2) is on ‚ and the switch
lever (3) and trigger switch (5) are
operated simultaneously.
HSA 65, HSA 85
Trigger Switch
Motor speed can be controlled with the
trigger switch. Depress the trigger switch
to accelerate the motor.

Switching Off

1
Release the switch lever (1) and the
N
trigger switch (2).
3
4
Move the retaining latch (3) to ƒ –
N
the trigger switch (4) cannot be
operated – the power tool is locked
to prevent start-up.
Always remove the battery from the
power tool during work breaks and after
finishing work.
English
41