How To Install The Handset (See Right Flap) - Topcom Webtalker 6000 Skype Anleitung

How to install the handset
Please refer to the right flap of this Installation Guide for
illustrations for the installation of the handset.
1) Push the top of the battery compartment cover on the
back of the handset inwards and downwards.
2) Insert the two batteries provided with the handset, making
sure that their plus and minus ends are facing the same
way as shown in the illustrations on the sides of the battery
compartment.
3) Slide the battery compartment cover shut.
4) Affix the belt clip as illustrated.
5) Connect the power adapter of the charging cradle to an
active power outlet.
6) Place the handset in the charging cradle to charge the
batteries.
7) Wait for 10 minutes and the batteries will be ready for
first-time start-up.
Notes:
• After completion of the full installation procedure we
recommend that you charge the batteries fully before first
use. This takes approximately 6 hours.
• Normally, you need to be within 50 m of the base station
to connect successfully.
14
H O W T O I N S TA L L T H E H A N D S E T