Mute Function; Paging; Handset Lock; Keypad Lock - Topcom cocoon 60 Bedienungsanleitung

Cocoon 60

4.7 Mute function

It is possible to deactivate the microphone during a conversation. Now
you can speak openly without being heard by your correspondent.
• Press the Mute button during a conversation. The microphone will be
deactivated. The MUTE symbol
• Press the Mute button again when you want to continue the conversa-
tion.

4.8 Paging

When you press the Paging button on the base unit, the handset emits a
ringing signal for 1 minute. This signal helps you find a lost handset. The
symbol blinks on the base unit. The message "PAGE" appears on the
display.

4.9 Handset lock

When a particular number has been locked, every phone number, starting
with this number, will be blocked and cannot be called.
• Press the Set button.
• Press numerical button '8'.
• Enter the 4 digit PIN code (default 0000).
• Enter the number you want to lock (max. 3 digits). You can erase a
digit by means of the Mute button.
• Press the Memory button. The unit emits a confirmation tone.
Default setting : no handset lock.
As soon as you dial the blocked number, "barring" is shown on the display.
To remove a blocked number, follow the same instructions but erase the
blocked number by pressing the Mute button.

4.10 Keypad lock

When the keypad is locked, the keypad buttons can no longer be pressed,
except for the Set button.
• Press the Set button.
• Press numerical button '7'.
• ' ' and 'Hold' are shown on the display.
Default setting : no keypad lock.
Follow the same instructions to deactivate this function.

4.11 Out of range warning

When the handset is out of the working range of the base unit during a
conversation, the unit will emit a warning signal every two seconds to
warn the user that he has to move closer towards the base unit. If the
appears on the display.
23