Megasat Caravanman 65 / 85 Premium Bedienungsanleitung Seite 37

7. Troubleshooting
Emergency operation: A failure in the antenna, you can change the DIP switch on
the back of the unit, control the Antenane manually.
up
1
2
1
2
1
2
Note: The default settings of the DIP switch, see page 10.
Error messages of the control unit
EL Motor STALL
AZ Motor STALL
SOLUTION: Bitte überprüfen Sie, dass keine Hindernisse die Antenne blockieren.
EL Motor NO POWER Elevation motor receiving sufficient power.
AZ Motor NO POWER Azimuth motor receiving sufficient power.
SOLUTION: Please check the connecting of the control cable and/or whether an
adequate power supply for the antenna is present (12 V, 5 A)
SK Motor NO POWER Skew errors of the Auto Skew unit
SK Count
SOLUTION: Please contact a technician of your local dealer.
Note:
After an error message, the control unit must be turned off by simultaneously pres-
sing the STOW and SEARCH button. To switch on, press the Power button again.
down
3
4 5
3
4 5
3
4 5
Elevation motor blocked, the antenna can not straighten up.
Azimuth motor blocked, the antenna can not turn.
Skew errors of the Auto Skew unit
Cycle Test
The antenna simulates
6
the search.
Manueller Modus (Elevation)
The antenna can be controlled via
6 the SEARCH and STOW button.
Manueller Modus (Azimuth)
The antenna can be controlled via
6
the SEARCH and STOW button.
ENGLISH
15